Sumiko Bluepoint 3 Cartridge
Sumiko Bluepoint 3 Cartridge
Sumiko

Blue Point No3 Moving Coil Cartridge

A new phono cartridge replacing the admired Blue Point No. 2

Clear
1 Year
Enquiry

Description

Recently, Sumiko made the decision to explore the resonance optimisation of the Blue Point No. 2 as they recognised there was room for refinement for this well-established cartridge. Resonance has a more significant impact than many listeners realise and Sumiko wanted to reimagine how the housing resonates around the generator in the Blue Point range. This resulted in the arrival of the new Blue Point No. 3.

With the tried and true moving cartridge generator system, the smoothness is enhanced with the subtlety and nuance you’d expect from a Sumiko moving cartridge. Blue Point No. 3 assembles its sonic picture from the ground up with its low-end response. Full and warm yet defined and textured, the cosiness of the bass will invite you right in. In addition to this, you can expect a similar richness through the mids that remain decipherable, high-frequency attack and decay that’s simply sweet and airy.

Having developed such a refinement on a classic design, introducing both a high and low output variant was a no-brainer. As strongly as we admire the Blue Point No. 3 High, the Blue Point No. 3 Low is a game changer. Owners of moving cartridge phono stages can experience the same audio experience mentioned, but with the depth and imaging typical of a low-output design. Similar to its predecessors, Blue Point No. 3 remains a high-value performer that is affordable and with the introduction of Blue Point No. 3 Low, there’s a Blue Point for everyone.

Key Features:

  • High Output Moving Coil cartridge with 0.3 x 0.7 micron Elliptical stylus
  • Sound refinement of an MC with the output voltage of a typical MM design
  • Low-resonance body that’s easy to install to any common tonearm
  • Overhead mounting design
  • High output for easy matching to a phono stage
  • Easy to set-up and install

Blue Point No. 3 Low

Frequency Response:
13Hz – 35kHz

Output Voltage:
0.5mV @ 1kHz

Internal Impedance:
28 Ω

Load Impedance:
>100Ω

Stylus Type:
0.3 x 0.7mil

Channel Separation:
30dB @ 1kHz

Channel Balance:
<1dB@ 1kHz

Cartridge Type:
Moving Coil

Cantilever:
Aluminium Pipe

Compliance:
12×10-6 cm/dyn @ 100 Hz

Capacitance:
100pF-200pF

Vertical Tracking Angle:
20º

Tracking Force Range:
1.8 – 2.2g

Recommended Force:
2.0g

Cartridge Weight:
6g

Blue Point No. 3 High

Frequency Response:
13Hz – 35kHz

Output Voltage:
2.5mV @ 1kHz

Internal Impedance:
135Ω

Load Impedance:
47kΩ

Stylus Type:
0.3 x 0.7mil Elliptical

Channel Separation:
30dB @ 1kHz

Channel Balance:
<1dB@ 1kHz

Cartridge Type:
Moving Coil

Cantilever:
Aluminium Pipe

Compliance:
12×10-6 cm/dyn @ 100 Hz

Capacitance:
100pF-200pF

Vertical Tracking Angle:
20º

Tracking Force Range:
1.8 – 2.2g

Recommended Force:
2.0g

Cartridge Weight:
6g

Replacement Stylus Unit:
Re-Tip Exchange (See Dealer)