Reference CD9 SE CD player
The Reference CD9SE CD Player/DAC combines the best of both, a super high-resolution compact disc player with a super high-resolution digital-to-analogue converter that is stunning in its musicality.
The Reference CD9SE incorporates four digital inputs: USB 2.0HS, AES/EBU, RCA, and Toslink. All inputs handle 24 bit / 192k resolution. The Reference CD9SE retains the Philips PRO2R transport, still the best dedicated CD mechanism that is simply unsurpassed for compact disc playback. Benefitting from what we have learned in the development of the Reference DAC, the REF CD9 utilizes quad 24-bit DACs running in mono mode, with dual master oscillators; one for 44.1/88.2/176.4 sample rates, the other for 48/96/192kHz sample rates. Sample rate conversion is selectable for all inputs, allowing playback in native resolution or via upsampling, including compact disc and all inputs, including USB. Additionally, there is a selectable digital filter, with either fast or slow rolloff.
Like other Reference products, the analogue section is vacuum-tube, with four 6H30 dual-triodes, and there is vacuum-tube power-supply regulation featuring a 6550WE with a 6H30. The front panel has the familiar, dimmable CD display on the left side. On the right side there are LEDs to indicate sampling rate, input selection, filter and power. In addition to the digital inputs, the back panel includes Digital Outputs (AES/EBU and BNC), single-ended RCA and balanced XLR outputs, and a 15A IEC power connector.
Sonically, the Reference CD9SE is in a new class, combining the magical musicality of tubes with remarkable transparency and aliveness. The Reference CD9SE sounds fast, with great transient speed, improved dynamics from top to bottom, much greater resolution of inner detail, with a focus and purity that is captivating. Rhythm, pace and timing are better than ever, something you must hear to appreciate. It’s time to hear your music in High Definition.
+0-3dB, 3Hz to 96kHz at rated output. 0.15dB 20Hz to 20kHz. (Balanced, 200k ohms load)@ 192kHz sample rate.
THD+N Less than .003% at 2V RMS BAL output.
Dynamic Range (AES17)
RMS Noise Level
14.0dB Balanced, 7.0dB SE.
Digital: 75 ohms RCA, 110 ohms AES/EBU, OPT 660nm TOSLink fiber 44.1 to 96kHz.
660 ohms Balanced, 330 ohms SE Main (2), 20K ohms minimum load and 2000pF maximum capacitance.
At 0.0dB input, 5V RMS into 200K ohm balanced load.
Digital Sample Rates
24 bits @ 44.1kHz to 192kHz, SPDIF, AES/EBU and USB 2.0 HS.
Select upsampling or Native mode; CD, RCA, AES/EBU, TOS upsample to 176.4 or 192kHz. USB upsamples to 88.2 or 96kHz.
22.579mHz ±20Hz for 44.1, 88.2 & 176.4kHz. 24.576mHz ±20Hz for 48, 96 & 192kHz.
XLR Balanced AES/EBU 110-ohms 4V P-P, BNC coax SPDIF 75-ohms 0.7V P-P.
107dB @ 1kHz.
Signal Format (DISC)
Sample freq. 44.1kHz, Quantization bit; 16bit linear/channel, Channel bit rate; 4.3218Mb/sec, Channel modulation code; EFM (8-14 modulation), ERROR CORRECTION; CIRC.
Drive Mechanism (Top Load) Wow & Flutter; Un-measureable (Quartz stability); Discs; Accepts 5″ (12cm) and 3″ (8cm) sizes.
Type; 3-beam LDGU (Laser Diode & Grating Unit), with holographic diffraction light pen, Laser; GaAlAs semiconductor, 780nm, 0.5mW max. output, Servo; Digitally-controlled low inertia linear positioning actuator.
High-stability crystal-controlled re-clocking for all outputs.
(4) 6H30 dual triodes, plus (1) 6550WE & 6H30 in power supply.
105-125VAC 60Hz (210-250VAC 50/60Hz) 120 watts maximum. Sleep mode 1 watts maximum.
Width 19″ (48 cm); Height 5.25″ (13.4 cm) (standard rack panel); Depth 15.375″ (39 cm);