PHONO-1 MkII L Phono Stage
Enjoy the full musical experience from every track and every album with PHONO-1 MkII L, the perfect interface between your record player and your amplifier.
MC | MM Preamplifier PHONO-1 MkII L gets the best from any high-quality record player, with maximum dynamic range and supreme detail resolution. With more than 10 gain settings, 15 resistance and 9 capacitance settings, PHONO-1 MkII L leaves nothing to chance. It makes the perfect match for almost any Moving Coil or Moving Magnet cartridge.
The New PHONO 1 MKII L features improved performance, a new gold-plated L-shaped Printed Circuit Board and significantly enhanced accessibility for the customisation DIP switches.
The sound quality improvements are subtle but significant. The PHONO-1 MKII already was better than the original due to the more optimal choice of components. The L takes this further with non-trivial PCB layout improvements. Moving the linear power supply to the main PCB allowed a significant track and ground plane layout optimisation. The new design ensures signal tracks are of equal length, impedances lowered, and track widths adjusted to direct current flow.
The PHONO-1 already included an unusual grounding selection switch with three positions giving a choice of Hard Ground, Ground Lift, or Soft Ground. The new L variant also provides a second ground terminal that is hard-wired to the signal ground. This, in certain installations, may achieve even lower background noise from the record player.
The PHONO-1 MKII L is user-configurable for most Moving Magnet and Moving Coil Cartridges available. The DIP switches on the bottom of the unit facilitate the choice of 15 input impedances and 9 options of capacitance together with 10 choices of gain. For example, it allows a somewhat peaky (with a rising HF response) Moving Coil cartridge to be tamed by adding capacitance rather than by reducing input impedance. Lowering the input impedance tends to ‘slug’ the sound, reducing musical performance and drama along with lowering the brightness. Adding capacitance while keeping the input impedance higher allows the full performance to shine.
New ‘L’ shaped high-quality gold-plated PCBs for the main phono circuit and the mains power transformer ensure optimised grounding and power distribution. In addition, stainless steel shield ensures that any unwanted interference is kept well away from the audio signal.
The shields, combined with the use of high-quality components and special solder, guarantee consistent optimum performance for the long term.
A -way switch provided at the back of PHONO-1 gives the options of ‘Hard Ground’, ‘Ground Lift’ or ‘Soft Ground’ connection of the preamplifier and the chassis to minimise any hum introduced between the PHONO-1 MKII L and the main amplifier.
The PHONO-1 MKII L is available in a range of high-end finishes, including a new DG-1 design featuring a front panel to match the new Vertere record player. Other finishes available: Silver aluminium, Signature Vertere Orange and Semi-matt Black. The power LED is now orange to easily identify the PHONO-1 MKII L version.
Main Phono Circuit on Separate Gold Plated PCB
Linear, Int. Switchable
Transformer on Separate Gold Plated PCB
40.2dB to 62.8dB
In 10 Steps – See Manual
High Gain version – Add 6.4dB to all settings
Input Impedance Settings Resistance
47k for MM
78R to 47K for MC – in 15 Steps – See Manual
100pF & 470pF for MM
100pF to 1.02uF for MC – In 9 Steps – See Manual
20Hz – 20kHz
< -78dB – AWD
Front Panel Options
Vertere Orange, Silver, Black
210 x 235 x 55mm
W x D x H (Incl. Switches & Feet)