Dan Dagostino Momentum HD PreampDan Dagostino Momentum HD Preamp
Dan D’agostino

Momentum HD Preamplifier

Only the Momentum HD Preamplifier delivers the sound quality and drive necessary to maximize the performance possible from the Momentum M400 monoblock and Momentum S250 stereo amplifiers.

Clear
5 Years
Enquiry

Description

The Momentum HD Preamplifier builds on the award-winning platform of the Momentum Preamplifier. The new HD status represents the high dynamic and high definition improvements that have been achieved in this substantial upgrade.

Advancements in the audio circuitry, power supply, and control sections are incorporated in the new Momentum HD Preamplifier.

Like the Momentum amplifiers, the preamplifier uses complementary balanced circuit topology for maximum bandwidth and low noise. Its audio circuitry is fully discrete, with no op amps. Zero-feedback design assures the most musical sound quality. Volume adjustment is made through a resistor network governed by an optical controller—the cleanest, most transparent possible method of controlling volume.

A completely new discrete differential FET input stage features two current sources per leg and an input impedance greater than 1MOhm. This ultra-high input impedance isolates the input stage and thus the entire audio signal path from external variables.

This new input stage started as an engineering exercise that delivered exceptional results. Fine-grain detail and delicate musical shadings are rendered with a lushness and richness that were simply unattainable previously.

Housed in a separate chassis for maximum isolation, the Momentum HD main power transformer is 33% larger as compared to the original Momentum Preamplifier. A unique winding technology, first employed in the Momentum M400 amplifier, delivers greater power output from the same footprint. Separate supplies power audio and control circuitry, so the control circuits are completely isolated from the audio circuits. Internal circuitry filters RF noise from the AC powerline and compensates for asymmetric power waveforms and DC on the main power line.

Taking advantage of the increased power supply capability, the output stages are now operating at a 36% percent higher voltage. The increased output voltage has opened up the dynamics on both the micro and macro level with contrasts striking in their speed.

Also new is the Bluetooth technology featured in the included remote control. The Bluetooth backbone extends the range of the remote by a factor of five and eliminates line of sight limitations that are inherent in IR remote controls.

Newly designed tone and volume control circuitry increases range and precision in both circuits.

Finish
Silver
Black
Custom Finishes Available Upon Request

Inputs
6 balanced XLR stereo
Outputs 2 balanced XLR stereo

Frequency Response
0.1 Hz to 1 MHz, -0.5 dB
20Hz to 75 kHz, ±0 dB

Distortion (Full output)
<0.02%, 20 Hz to 20 kHz

Signal-to-Noise Ratio
-75 dB, unweighted

Gain
-10.95dB or +26dB, switchable

Power Consumption (at Standby)
<1 watt

Input Impedance
1 MΩ

Output Impedance
10Ω

Dimensions (preamp)
4.3 x 18 x 12 inches (hwd)
10.8 x 45 x 30 cm (hwd)

Dimensions (power supply/base)
3 x 11 x 8 inches (hwd)
7.5 x 27.5 x 20 cm (hwd)

Weight
98lbs/45kg
w/ power supply

1 Momentum HD Preamplifier, 1 Momentum Preamplifier power supply, 1 remote control, 4 cone feet, 1 AC power cord, 1 antenna, 1 power supply cable, 1 owner’s manual, 1 pair of white lifting gloves