Soulution 511 Stereo Power AmplifierSoulution 511 Stereo Power Amplifier
Soulution

511 Stereo Power Amplifier

The 511 is equipped with the same “switched-mode” power supply technology, optimised for audiophile applications, as the series7 products.

5 Years

£27,500In-store purchase only.

Enquiry

Description

The 511 is optimised for shortest “signal paths” for the music signal but as well for shortest paths and optimal flow of the current supplying the amplifier stages. Get inspired by the uncompromising music playback and enjoy the diversity and natural beauty of the music. A sound experience, of which everyone will be enchanted. Convince yourself.

The amplification circuit similar to the technology used for the 711 and 701 amplifiers. At its core is a proprietary voltage amplification stage that consists of linearised amplifiers operating up to a cut-off frequency of 80 MHz. Current amplification is done in three stages, each using a very small and thus almost linear operating range. The high Class A operation supplemented by 500,000 µF of storage capacitance in the power supply results in a nearly infinite impulse response. Massive copper bars on the amplifier board and to the speaker terminals ensure that all the power of the 511 stereo amplifier is available to drive the speaker. This ensures the 511 does not get the plaything of the  loudspeakers, but controls them with the appropriate precision, power and velocity asked for by the music signal. High-precision idle current management ensures optimal Class A operation for all conditions, without requiring any readjustment in the music signal. Optimal sound is thereby guaranteed immediately from switch on.

A total of 10 power supplies – optimised for each function – feed the 511 stereo amplifier. Circuitry that does not process audio signals should not be able to influence them. Therefore those supplying the digital and audio circuits are electrically isolated from each other by optocouplers. Four cutting-edge switched-mode power supplies combined with more than 500’000 µFarad of storage capacitance deliver 2,400W of audiophile quality power. They feature high performance filtering at the input and output, and six linear, high speed, ultra low noise voltage regulators to deliver considerably more stable power than any conventional, transformer-based technology.

Control circuits that protect the 511 stereo amplifier against RF or DC signals at the input, and short circuits at the output ensure safe operation in all situations. The input level is also monitored continuously. In case a malfunction is detected the 511 stereo-amplifier is muted and will automatically power down.

 

Mains
100 – 240 V (50 – 60 Hz)

Power consumption
< 0.5 W Standby
idle 350 W
max 1600 W

Outputs
2 pairs Cu-terminal, gold plated

Gain + 26 dB

Power output
2 x 150 W @ 8 Ω
2 x 300 W @ 4 Ω
2 x 600 W @ 2 Ω

Pulse power
> 2 × 2000 W

Frequency response (– 3 dB)
0 – 800 kHz

THD + N
< 0.001% at 50 W @ 4 Ω
(20 Hz – 20 kHz)

Signal-to-noise ratio
108 dB (5 W @ 1 kHz)

Channel Separation
> 120 dB @ 1 kHz

Damping factor
> 10,000

Output current max
45 A (Limited)

Analog inputs
1 × balanced (XLR)

Input impedance
2 kΩ balanced (XLR)

LINK
12 V control signal

Dimensions (WxDxH)
442 × 270 × 448 mm

Weight
~30 kg