Shunyata Delta D6 Mains ConditionerShunyata Delta D6 Mains Conditioner
Shunyata Research

Hydra Delta D6 UK Mains Conditioner

The Delta D6 power distributor provides compelling proof of Shunyata Research’s commitment to delivering state-of-the-art performance at an affordable price. The Delta D6 deservedly takes it place in their Performance Line of power distributors.

2 Years

£3,500

Enquiry

Description

For the first time Shunyata Research has incorporated its finest, most exclusive technologies into a package priced so affordably that it redefines value well beyond its price.

The Delta D6’s unheard of combination of measurable noise reduction, patented science, exclusive parts and limited life-time warranty will be impossible to find outside of Shunyata Research’s meticulously hand-crafted line of reference power distributors.

Most power conditioners reduce power line noise using common industrial filter designs. These filters use transformers, coils, baluns, toroids, ferrite cores and large capacitors which by their very nature are highly reactive. They may produce undesirable sonic effects when used with high-end audio components especially amplifiers.

The NIC™ (Noise Isolation Chamber) reduces high frequency power line noise using a patented non-reactive ferroelectric substance that actually absorbs high frequency noise. This reduces power line noise without any of the negatives associated with power filter coils, capacitors and transformers.

Traditional power conditioners are designed to block incoming noise from outside the home, but do not address the noise that is generated by the electronic components themselves. In fact, most conditioners reflect noise back into other components connected to the power conditioner. CCI™ (Component-to-Component Isolation) is one of the most significant but often overlooked aspects to power system performance. The CCI™ filter consists of a proprietary multi-stage filter that reduces electrical noise and interference generated by a component’s power supply.

Significant amounts of noise exist on the ground plane of power lines. The ground wires can act as antennae, picking up electrical noise that can degrade the performance or operation of the electronic components. Ground Plane Noise Reduction (GP-NR™) is a proprietary technology developed by Shunyata Research to significantly reduce ground-plane noise; improving low-level resolution and clarity. The system includes one to four terminals, depending on the model, to connect as many as 12 audio components. We offer several models of CGC chassis grounding cables each made to your custom length and termination requirements.

Maximum Voltage
90-125 VAC r.m.s. unregulated (US)
220-240 VAC r.m.s. unregulated (EU, AS, AU)

Input Current Ratings
Maximum Continuous Current: 20A (US, AS)
Maximum Continuous Current: 16A (EU, AU)

Output Current Ratings
Max Current/Outlet: 20A (US, AS)
Max Current/Socket: 16A (EU, AU)

Transient Suppression
Maximum Transient Protection: 40,000 A @ 8/50 μs

Over-Current Protection
Hydraulic Electromagnetic Breaker

Wiring System
8 gauge ArNi® VTX™ Buss System
10 gauge ArNi® VTX™ Wiring

Ratings: 600 V 105° C

Noise Suppression
Input to Output (100 kHz – 30 MHz): > 40 dB reduction
Zone to Zone (100 kHz – 30 MHz): > 50 dB reduction

Outlets & Connectors
Zones of Isolation: 6 Zones
Inlet: IEC C19R

US Outlets: 6 NEMA5-20R
AS Outlets: 6 NEMA 5-20R
EU Sockets: 6 CEE 7/3
AU Sockets: 6 AS/NZS 31123

Vibration Control
Vibration dampening panels (internal)
AC outlet dampening gaskets

Construction
Aluminum and steel chassis
Anodized, aluminum faceplate

GPNR
Length: 127 mm
Diameter: 38 mm

Dimensions
Width: 17.0 inches (20.32 cm)
Depth: 9 inches (22.9 cm)
Height: 4.6 inches (11.7 cm)
Weight: 9.5 lbs (4.3 kg)