McIntosh MC1.25KW
McIntosh MC1.25KW
McIntosh MC1.25KW
McIntosh MC1.25KW
Mcintosh

MC1.25KW Mono Amplifier (Pair)

A simple glance at this 71.7 kg amp is enough to convey its power and performance capabilities, but when you hear it – then you’ll truly understand what it can do.

3 Years

£34,990In-store purchase only.

Enquiry

Description

The MC1.25KW Quad Balanced Power Amplifier is one of the most advanced McIntosh amplifiers. Redesigned from top to bottom, it replaces the venerable MC1.2KW as their most powerful single chassis monoblock amplifier.

The MC1.25KW outputs 1,200 Watts of pure power into a single channel with a nearly imperceptible total harmonic distortion of 0.005%. This astonishing amount of power is fully available to 2, 4 or 8 Ohm speakers via the Autoformer™ technology. A pair of these amps can anchor a home audio system that can rival nearly any stereo system in the world.

Updates and enhancements abound in the MC1.25KW. A 50% increase in filter capacity improves the performance of low end frequencies as well as increasing dynamic headroom. The top of the amp showcases an updated yet unmistakable McIntosh industrial design that will fit right in with current McIntosh products or those made decades ago. The audio Autoformer and power transformer remain located just behind the front panel but are now contained in new glass topped enclosures. In between them is new circular glasswork housing the amplifier’s name badge that is adorned with a decorative trim ring.

The rear of the unit features 4 of our McIntosh Monogrammed Heatsinks™. Made from high quality materials with excellent thermal conductivity properties, these heatsinks are so efficient at dissipating heat that they warrant bearing the McIntosh “Mc” logo. They connect to advanced high current output transistors that eliminate thermal equilibrium lag time so that the first musical note played sounds just as good as songs played later in your listening session. The heatsinks are capped with handsome ventilation trim plates. These trim plates and the circular trim ring are made from aluminium and are finished to match the front panel handles.

The AC receptacle has been repositioned to provide additional clearance so a wider assortment of power cords can more easily be used. All of this sits atop a polished stainless steel chassis which rests on 4 new redesigned feet that feature a chamfered edge. Other updates include an updated power transformer, heavier gauge internal wiring, upgraded circuit components, and the addition of our power management system that will turn the amp off after a set amount of time when no input signal has been detected.

With all the changes and improvements made in the MC1.25KW, one thing that hasn’t changed is the large, fast responding 27.9 cm blue Watt meter that accurately shows the amp’s power output. Also unchanged is the signature black glass front panel with control knobs, illuminated logo, and aluminium end caps with handles. The front panel and meter have new direct LED backlighting for improved appearance and colour accuracy.

Sold in Pairs

Power Output per Channel
1200 Watts @ 2, 4 or 8 Ohms

Number of Channels
1

Total Harmonic Distortion
0.005%

S/N below rated output
Balanced: 124dB
Unbalanced: 120dB

Dynamic Headroom
2.2dB

Damping Factor
>40 Wideband

Rated Power Band
20Hz to 20kHz

Frequency Response
+0, -0.25dB from 20Hz to 20,000Hz
+0, -3dB from 10Hz to 100,000Hz

Circuit Configuration
Quad Balanced

Circuit Design
Solid State

Output Type
Autoformer™

Meters
Yes

Meter Light Switch
Yes

Balanced Input
1

Front Panel
1/2″ Glass with handles

Illumination
Direct LED

Chassis Style
Polished stainless steel & black painted steel

Dimensions (W x H x D)
45.09cm x 31.27cm (including feet) x 55.88cm (including the front panel and cables)

Weight
71.7 kg

Shipping Weight
83.4 kg