Soulution 711 Stereo Amplifier
Soulution 711 Stereo Amplifier
Soulution

711 Stereo Power Amplifier

Higher precision, even more stability and velocity than already has been achieved with the Soulution 710 stereo amplifier. Though it may have seemed impossible, the Soulution 711 significantly outperforms its predecessor in all disciplines.

5 Years

£59,500In-store purchase only.

Enquiry

Description

The new “switched mode” power supply technology brings the Soulution 711 to new level of per­formance. Improve­ments on the test bench get confirmed by the performance in the listening room. Words alone cannot convey the per­for­mance and sheer acoustic presence of the Soulution 711 stereo­ amplifier. We’ve combined the ultimate technical specification and highest possible performance with just one aim – to liberate the best the music has to offer. Listen like never before. Marvel. Enjoy. Without limits.

The ideal amplifier is perfectly load stable, 100% level and phase accurate, and has no long signal paths. It should not use tricks like over amplification and very high negative feedback to achieve good results in the lab but poor sonic per­for­mance in the listening room. The Soulution 711 stereo­ amplifier combines extreme speed with an ultra-wide band­width (1 MHz/– 3 dB) and a high current capability far beyond that of valves and output trans­formers. A unique and sophisticated circuit design opens up sonic qualities once considered incompatible: Precision, Velocity, Stability and Power. In the Soulution 711 they are brought together for the first time – all in the pursuit of musical perfection. The Soulution 711 is closest of all to this ideal. It can provide up to 300 Watt continuous power into 4 Ω and more than 6,000 Watt transient power per channel. More than enough to breathe new sonic life into even the most demanding, low-efficiency loudspeakers.

Throughout, the Soulution 711 is designed as a consistent dual-mono layout. Both left and right channels feature identical audio amplifiers, each with its own high efficiency power supply. The housing forms an integral part of the design providing cooling for the output stages and damping to minimize microphonic interference.

From the input the Soulution 711 first buffers the music signal. A high performance correction amplifier is then used to capture and correct any deviations in the signal, very quickly and very precisely. Ultra wideband amplification using no feedback loops follows, a less than 10 nanosecond transit time and level accuracy to within 0.1 dB ensuring signal purity. The whole is housed within a sealed module, maintaining a common temperature across all stages to further guarantee precision. The output stage comprises 14 power transistors per channel, all mounted onto a massive copper rail which is temperature controlled for a constant quiescent current. The Soulution 711’s impressive low level signal handling is reflected in its raw power delivery. Current levels of 120 A and more are readily attainable.

Mains
220 – 240 V (50 – 60 Hz)
100 – 120 V (50 – 60 Hz)

Power consumption
< 0.5 W standby
idle 300 W
max 1600 W

Outputs
2 pairs Cu-terminal, gold plated

Gain
+ 26 dB

Power output
2 × 150 W @ 8 Ω
2 × 300 W @ 4 Ω
2 × 600 W @ 2 Ω

Pulse power
> 2 × 6000 W

Frequency response (– 3 dB)
0 – 1 MHz

THD + N
< 0.001% at 50 W @ 4 Ω
(20 Hz – 20 kHz)

IM distortions
< 0.005% SMPTE
< 0.0006 CCIR

Signal-to-noise ratio
108 dB (5 W @ 1 kHz)

Channel separation
> 120 dB @ 1 kHz

Damping factor
> 10 000

Output current max
120 A (limited)

Inputs
1 × balanced (XLR)
1 × unbalanced (RCA)
Input impedance 4.8 kΩ balanced (XLR)
10 kΩ unbalanced (RCA)

Dimensions
480 × 280 × 535 mm
(W × H × D)

Weight approx.
65 kg

711 Amplifier, Mains power cord, User manual